Mods please delete
Moderator
Joined: Jul 2010
Posts: 12,055
Likes: 1,559
From: Media PA
Measurement from wheel mounting surface to wheel mounting surface should be about 3" or so wider on any '05+ rear axle compared to our stock EX rear axles. Ford increased the rears along with the front width (WMS to WMS not track width) when the front suspension changed over to coils for the 4X4 trucks. That's why the '05+ OEM wheels require spacers when used on older rigs like our EXs.
Thread Starter
|
Senior User
Joined: May 2004
Posts: 309
Likes: 1
From: Stewartstown, Pa
Measurement from wheel mounting surface to wheel mounting surface should be about 3" or so wider on any '05+ rear axle compared to our stock EX rear axles. Ford increased the rears along with the front width (WMS to WMS not track width) when the front suspension changed over to coils for the 4X4 trucks. That's why the '05+ OEM wheels require spacers when used on older rigs like our EXs.
Thread
Thread Starter
Forum
Replies
Last Post
