Help
Thread Starter
|
New User
Joined: Dec 2020
Posts: 1
Likes: 0
Help
Alright guys 2007 f350 6.0. About a month ago had very bad vibration one day coming home from work. I had a code for injector 8. Had the shop put one in. Helped out a bunch but it still had a miss code from injector 8. I drove it and notice the code went away for a week then came back then gone the past two days. I drove it today and it would die then when I pulled over it would start right back up. It did this about 6 times today. Also would act up when idling sometimes. But if I set my cruise to 60 the rpms will jump and the truck wants to take off but drop back down. I had a new ficm put in recently. My buddy’s are thinking it a Eletrical issue. I just dropped it back off at the shop tonight. Any help would be appreciated
Fleet Mechanic
Joined: Jul 2018
Posts: 1,629
Likes: 103
From: Jacksonville Florida
Thats all the way in back. Have you checked the injector connection and wreing on #8. Also maybe check injector harness on that side. Would say ficm plug also, look for bent pins or burn spots. And make sure it's clicked in all the way.
Fleet Mechanic
Joined: Nov 2006
Posts: 1,664
Likes: 219
From: Northwest
One bad injector should not make it die. When did you change fuel filters and drain the water from the fuel?
As mentioned above "Where are the parts coming from?".... Where did the ficm come from ?
Hobo
As mentioned above "Where are the parts coming from?".... Where did the ficm come from ?
Hobo
Thread
Thread Starter
Forum
Replies
Last Post
milkman00
Modular V8 (4.6L, 5.4L)
5
Jan 17, 2009 12:06 PM
