OBS clutch
Thread Starter
|
New User
Joined: Dec 2020
Posts: 2
Likes: 0
OBS clutch
I replaced the clutch in my 92. Along with slave and master cylinder and even a whole new line. Literally the whole clutch system is new. After replacement the clutch pedal stays on the floor. If you try and pull it up it pulls the rod out of the master. It acts as if the rod is to short but it is the same length as the factory and I didnt have this problem before clutch replacement. I bought a power bleeder kit. Thinking maybe it is just trapped air. Got all the air out of the system. Still the same. Warrantied out the master cylinder. Still same issue. Have any idea what I've done/doing wrong? Thanks in advance.
Thread Starter
|
New User
Joined: Dec 2020
Posts: 2
Likes: 0
351w and the zf5...or what ever.
I think I figured it out though. The pedal assembly nut came loose and I didnt realize it. Snugged that down and now have a pedal. Haven't been able to test yet though.
I think I figured it out though. The pedal assembly nut came loose and I didnt realize it. Snugged that down and now have a pedal. Haven't been able to test yet though.
Thread
Thread Starter
Forum
Replies
Last Post
Windplanet
Aerostar
5
Nov 6, 2019 03:15 PM
RRranch
1994.5 - 1997 7.3L Power Stroke Diesel
7
Aug 30, 2013 05:31 AM
red97stroker
1994.5 - 1997 7.3L Power Stroke Diesel
40
Sep 19, 2010 12:16 PM
PSDLOVER
1999 - 2003 7.3L Power Stroke Diesel
15
May 24, 2007 08:33 AM
