Manual locking hubs

Reply Subscribe

Thread Tools

Search this Thread

Oct 11, 2020 | 05:52 PM

SgtNick_PSD

Thread Starter

Mountain Pass

Joined: Nov 2016

Posts: 195

Likes: 2

From: AK

Manual locking hubs

I need to replace the hubs, current ones are very hard to turn (have to use channel locks). After looking up new hubs online, I came out with several different t options as far as spline count goes. Some are 30 spline, some 35, and I've seen 28 or 29 spline hubs. Do I have to pull mine and count them to know for sure which I have? Also have to replace front pinion bearing and possibly rebuild the front differential...

Oct 11, 2020 | 06:41 PM

Mich6.0

More Turbo

Joined: Feb 2005

Posts: 574

Likes: 3

From: Grand Rapids,MI

are they plastic hubs held by held in by a spring clip or are the bolted all the way around , you can check Rock Auto for prices , ULTRA-POWER 600204 {#1C3Z3B396DA $90 each

Oct 11, 2020 | 06:47 PM

SgtNick_PSD

Thread Starter

Mountain Pass

Joined: Nov 2016

Posts: 195

Likes: 2

From: AK

Quote:

Originally Posted by Mich6.0

are they plastic hubs held by held in by a spring clip or are the bolted all the way around , you can check Rock Auto for prices

Plastic hubs. I checked rock auto and there is the option for 30 and 35 spline hubs on the USA Standard Gear ones. Do you have experience with the other cheaper ones probably from China? The difference looks like Dana 60 or Dana 50 axle? How do I determine which I have?