Power window switch
Thread Starter
|
New User
Joined: Oct 2020
Posts: 4
Likes: 0
Power window switch
Hi guys I have a 2000 Excursion with a V10 it's a limited. I replaced the switch module on the driver's side door panel. The window lock button was broke. Replace the switch but my other three windows will still not roll down by using their window controls. Checked fuses not sure what to check next anyone have any ideas. All help is appreciated thanks..
Moderator
Joined: Jul 2010
Posts: 12,049
Likes: 1,548
From: Media PA
"Will still not roll down" did they function properly with the original switch module with the broken lock button or no, the way I'm reading it is that they didn't work prior to the new switch based on the above quote.
Thread Starter
|
New User
Joined: Oct 2020
Posts: 4
Likes: 0
UPDATE !!
Found the problem. A yellow stripped wire was broke in the boot that goes from the door into the cab of the truck.
Had to add wire and fish it back through. Was a tight job but fixed the issue. Thanks for the help!!
Found the problem. A yellow stripped wire was broke in the boot that goes from the door into the cab of the truck.
Had to add wire and fish it back through. Was a tight job but fixed the issue. Thanks for the help!!
Thread
Thread Starter
Forum
Replies
Last Post
