Swivel seat knowledge?
Thread Starter
|
5th Gear
Joined: Dec 2019
Posts: 5
Likes: 1
From: Santa Fe / Chicago
Swivel seat knowledge?
I'm trying to turn the passenger side chair into a swivel chair for my '03 Excursion. Ive seen these adapters from Scopema for the Ford Transit however I cant seem to find anything for an Excursion. Has anyone seen anything like this before or made one themselves?
I guess any plates can be drilled through to make up for the spacing but I should figure out how the chair attaches in the first place and if it has enough room to turn. The removal of the center console may be required.
I guess any plates can be drilled through to make up for the spacing but I should figure out how the chair attaches in the first place and if it has enough room to turn. The removal of the center console may be required.
FTE Remembers
Joined: Apr 2011
Posts: 8,259
Likes: 346
From: Northern California
I have 5 Stidd captains chairs on my boat snd as badass ( and expensive as they are i doubt they would or could ever come close to federal crash test standards for suv passenger vehicles.
likely why you only see them in RVs on the highway
likely why you only see them in RVs on the highway
New User
Joined: Jul 2019
Posts: 18
Likes: 0
Like this idea, was thinking of doing it myself in a 2000. I had already pulled the center console so the dog had a spot. This might be an option:
https://www.sportsmobilestore.com/fo...vel-seat-base/
https://www.sportsmobilestore.com/fo...vel-seat-base/
Thread Starter
|
5th Gear
Joined: Dec 2019
Posts: 5
Likes: 1
From: Santa Fe / Chicago
Im going to pull the passenger seat, The height of the one you linked might help it turn better then https://www.transitaccessories.com/swivels.php but that has more opportunities for attachment maybe.
Ill report my findings in a few weeks
Ill report my findings in a few weeks
Thread
Thread Starter
Forum
Replies
Last Post
navigator03ga
1997 - 2006 Expedition & Navigator
1
Sep 20, 2009 11:38 AM
BigMattXXL
1997 - 2006 Expedition & Navigator
13
Sep 8, 2003 07:45 AM
