When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I now have a kit made up for you for the Bullnose Brush guard, Kit comes with 2- side plates, (3/8") 4- weld on tabs, (two for the face bumper bolts, two for the fog light mounts) and 2 pieces of angle iron for mounting to the frame-horn, (not pictured) so you have a vertical area to bolt the side rails to. You get your own tubes.... Shipped FLAT, to save you big time on shipping!
hey reamer, i don’t know if you are selling these or not but could you send me detailed measurements? i’m trying to custom fab one with my dad. im trying to find some measurements but i cant. thanks
hey reamer, i don’t know if you are selling these or not but could you send me detailed measurements? i’m trying to custom fab one with my dad. im trying to find some measurements but i cant. thanks
. Common water pipe for the cross pieces has a 1/4" wall.
