2" leveling kit?
Senior User
Joined: Jan 2003
Posts: 383
Likes: 1
From: Newport News USA
You can always slap on 2" lift coil springs, and then have it aligned. Not only will you level it out like you want, but you'll also get rid of the spongy worn out front springs ya got. I put a set of the ProComp 2" lift springs and was very happy with 'em. I actually got closer to 3" of total lift, due to the old springs being so worn out.
Luke
Luke
Freshman User
Joined: Oct 2003
Posts: 39
Likes: 0
Check ebay they always have cheep stuff on there. You can probably just buy the whole lift kit fro cheeper than you could find just the front leveler. Then just use the front springs. A buddy if mide just weded a spring bracket about 2 inches lower than the stock bracket on the front end on his 73 Bronco. Its strait out of the wrong way to do things manual but it worked and if you didnt know you couldnt tell the difference.
Thread
Thread Starter
Forum
Replies
Last Post
guitarist41991
1987 - 1996 F150 & Larger F-Series Trucks
65
May 20, 2013 08:36 PM
