Truck keeps throwing code
Senior User
Joined: Dec 2006
Posts: 285
Likes: 0
From: Olive Branch, MS
lots of people having this problem
Ive tried...new batteries, both front abs sensors, checked all plugs under dash and truck (cleaned and applied dielectric grease), alignment, steering sensor adjustment.
Nothing has solved the problem yet.
Waiting on rear abs sensors to get here now.
Happens everytime I restart the truck within 4 miles of driving. Shut off happens again in 4 miles.
I find it infuriating and ridiculous that Ford doesnt know what is causing this.
Ive tried...new batteries, both front abs sensors, checked all plugs under dash and truck (cleaned and applied dielectric grease), alignment, steering sensor adjustment.
Nothing has solved the problem yet.
Waiting on rear abs sensors to get here now.
Happens everytime I restart the truck within 4 miles of driving. Shut off happens again in 4 miles.
I find it infuriating and ridiculous that Ford doesnt know what is causing this.
Trailering
Joined: Aug 2019
Posts: 23
Likes: 2
Not sure if it’s similar issue but I had something happen (can’t remember what exact message was) but I had kicked the plug near your emergency brake and it just needed unplugged and plugged back in and it solved my issue. It’s a big wiring harness down there. Could be an easy fix, hopefully so and good luck
Thread
Thread Starter
Forum
Replies
Last Post
theinrich
1983 - 2012 Ranger & B-Series
1
Oct 17, 2015 03:06 PM
