5.4 chain slap
Thread Starter
|
New User
Joined: Jun 2019
Posts: 1
Likes: 0
5.4 chain slap
Hello. I’m new to the forum so I am going to just generalize my question. I’ve read it 1 million times about guides tensioners phasers etc. so I redid mine completely including the new pump and upgraded tensioner’s ratcheting style. It got rid of the idol tick and low RPM ticking from the phasers which is nice but once I got it up out on the highway at 55 mph I start to get my chain slap back. The chain slap is what made me decide to do this teardown and when I did it I also found that my guide had broke off and two pieces were down in the pan. So after reading much about it I went with the Cloyes kit. I’m at a loss because I have read so much on forums about this issue I don’t even know where to begin other than to tear it all back down but I don’t know what I am going to be looking for? Any ideas or someone with similar issues would be greatly appreciated.
Thread
Thread Starter
Forum
Replies
Last Post
04navig8er
Modular V8 (4.6L, 5.4L)
3
Oct 28, 2015 08:19 AM
kbrown4308
1997 - 2006 Expedition & Navigator
18
Oct 28, 2013 10:40 PM
