Clutch Release Point
Thread Starter
|
Senior User
Joined: Feb 2010
Posts: 180
Likes: 0
Clutch Release Point
1991 F-250 302, 5 speed.
Fresh 302 with new clutch and flywheel installed. I am curious about the clutch release point. Ont this truck it starts to engage about 1" off the floor, and fully engage about 3" off the floor. Never had this set up with the hydraulic clutch, so just wondering if this is normal. Believe I bled the clutch correctly when I installed the motor. No driveability issues, shifts smoothly, just curious.
Fresh 302 with new clutch and flywheel installed. I am curious about the clutch release point. Ont this truck it starts to engage about 1" off the floor, and fully engage about 3" off the floor. Never had this set up with the hydraulic clutch, so just wondering if this is normal. Believe I bled the clutch correctly when I installed the motor. No driveability issues, shifts smoothly, just curious.
Thread
Thread Starter
Forum
Replies
Last Post
4WD F-150
1987 - 1996 F150 & Larger F-Series Trucks
9
Dec 30, 2005 03:15 PM
MustangGT221
Clutch, Transmission, Differential, Axle & Transfer Case
2
Feb 21, 2005 10:55 PM
