Shift adjustment
Thread Starter
|
Cross-Country
Joined: May 2012
Posts: 92
Likes: 0
Shift adjustment
Can any body tell me if I can change the shifting on my 2000 F550. I would like to make it a faster shift. It seems like now it is taking forever to shift. Long soft shift.
I don't care if it is a little harder. Just don't like the way it feels.
I have a laptop set up with forscan and I see there is a setting for shift percent or something like that.
Is that how to do it? Change the percent?
Thanks for any help.
I don't care if it is a little harder. Just don't like the way it feels.
I have a laptop set up with forscan and I see there is a setting for shift percent or something like that.
Is that how to do it? Change the percent?
Thanks for any help.
Cargo Master
Joined: Dec 2007
Posts: 2,037
Likes: 310
Not sure if you can do it that way but you can also accomplish it by chipping and/or tuning it. I had the same truck with a few performance mods and a SCT installed and it was a beast with the 4:88 gear. However, a regular SCT for a F250/F350 will not work on it because of the puter, so it requires a special chip. I think I sent in one of my extra SCT tuners to them and they reset it to work.
Lead Driver
Joined: Dec 2006
Posts: 7,092
Likes: 145
From: San Diego, CA
You can modify your valve body (e.g. Sonnax, TransGo, etc.) or buy a modified valve body to do it mechanically. You can also get custom tuning (which will require a chip) to do it electronically. That's about it AFAIK.
Thread
Thread Starter
Forum
Replies
Last Post
