Mass air flow sensor ground issue
Thread Starter
|
New User
Joined: Jun 2011
Posts: 14
Likes: 0
From: Rusty Western NY
Sorry SHO I have been driving old school F 150s pre 1995 for a lot of years.They were pretty simple.This is the first time I got my hands dirty with this one.I really didn't know what made the 04 Heritage different from the other 04s till a few days ago.
Thread Starter
|
New User
Joined: Jun 2011
Posts: 14
Likes: 0
From: Rusty Western NY
Yesterday while checking continuity on a few wires at my PCM harness. I decided to pull the computer and visually inspect the circuit board, I saw 2 spots that had some solder about the thickness of a hair,were the wires were soldered to the board. One spot happens to be between two 02 sensor wires bank 1 and 2 and it looked to be making contact between the two of them.I cleaned up both spots.Today I put everything back together drove at least 40 min.No codes and the cat. wasn't blazing hot.I think all is well.
Thread
Thread Starter
Forum
Replies
Last Post
Sailor'sGirl93
1983 - 2012 Ranger & B-Series
9
Jun 20, 2013 04:30 PM
penman39
1983 - 2012 Ranger & B-Series
6
Apr 28, 2006 01:47 PM
alcooner
1987 - 1996 F150 & Larger F-Series Trucks
5
Jul 15, 2005 08:45 PM
