Electrical problem
Thread Starter
|
Junior User
Joined: Sep 2017
Posts: 64
Likes: 0
From: The "sunshine" state
Electrical problem
I've got an electrical problem, the brake lights don't work when the pedal is pished. the blinkers don't work unless you turn the hazards on, they don't flash but turns the backlights. is this the multi-function-switch? also, I can unplug the brake light switch and it works normal.
Fleet Owner
Joined: Jul 2006
Posts: 20,376
Likes: 843
From: Mi'kma'ki
Do you hear the flasher clicking when you turn the turn signals on? If not,sounds like a failed flasher.If you don't have brake lights when you press the pedal,test for power at the switch.You should have power on one side,then nothing on the other until you press the pedal,then 12v on both sides when you do.
When you unplug the brake switch,what works like normal? I'm betting not the brake lights.
When you unplug the brake switch,what works like normal? I'm betting not the brake lights.
Thread Starter
|
Junior User
Joined: Sep 2017
Posts: 64
Likes: 0
From: The "sunshine" state
Do you hear the flasher clicking when you turn the turn signals on? If not, sounds like a failed flasher. If you don't have brake lights when you press the pedal, test for power at the switch. You should have power on one side, then nothing on the other until you press the pedal, then 12v on both sides when you do.
When you unplug the brake switch, what works like normal? I'm betting not the brake lights.
When you unplug the brake switch, what works like normal? I'm betting not the brake lights.
Thread
Thread Starter
Forum
Replies
Last Post
orlando.ortiz3
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
5
Mar 15, 2018 12:27 PM
drrider100
1999 - 2003 7.3L Power Stroke Diesel
7
Apr 3, 2017 11:32 AM
breadstick
1973 - 1979 F-100 & Larger F-Series Trucks
13
Mar 19, 2012 08:32 PM
