For All You 2011-2016 F250 F350 Folks
#1
For All You 2011-2016 F250 F350 Folks
I made a few how to videos and posted them on my youtube channel. All videos are specific to my 2011 F250 and apply to all 2011-2016 Super Duty trucks. Anymore youtube is where everyone seems to go for how to info. Ill list them below.
XL to XLT Chrome Grill The Cheapest Way Possible
https://www.youtube.com/watch?v=FRVK...ature=youtu.be
Lariat Instrument Cluster Swap Into a XL or XLT
2011 - 2016 F250 F350 How To Add Factory Steering Wheel Controls
2011-2016 Vent Position / Control Actuator Replacement
Misfire Monitor Neutral Profile Correction
2011 - 2016 F250 F350 Retained Accessory Power Delayed Exit Power Feed Without Aftermarket Accessory
XL to XLT Chrome Grill The Cheapest Way Possible
https://www.youtube.com/watch?v=FRVK...ature=youtu.be
Lariat Instrument Cluster Swap Into a XL or XLT
2011 - 2016 F250 F350 How To Add Factory Steering Wheel Controls
2011-2016 Vent Position / Control Actuator Replacement
Misfire Monitor Neutral Profile Correction
2011 - 2016 F250 F350 Retained Accessory Power Delayed Exit Power Feed Without Aftermarket Accessory
Last edited by 84convertablegt; 07-27-2018 at 10:46 AM. Reason: Fix a link
#3
#4
As a fellow owner of a 2012 XL, thank you for making these videos! If I ever manage to finish my current to-do list, I want to do the steering wheel control addition. I have researched it before and it took hours to find minuscule information that may or may not be applicable, so your video should hep tremendously.
Thank you!
Thank you!
#7
Trending Topics
#8
You sir, rock! Thank you.
I did the write up on the 2008 blend door actuator gymnastics. Pics are worth 1K of words. I wish I had the skill/time to do a youtube vid.
I acknowledged your efforts with a click on your reputation "balance symbol" in the upper right on the banner....everyone else needs to do the same!
Next, a vid on slider pin maintenance? Or how to machine in 316 stainless sleeves into the junk pin bores and whittle 316 pins to fit...lol
I did the write up on the 2008 blend door actuator gymnastics. Pics are worth 1K of words. I wish I had the skill/time to do a youtube vid.
I acknowledged your efforts with a click on your reputation "balance symbol" in the upper right on the banner....everyone else needs to do the same!
Next, a vid on slider pin maintenance? Or how to machine in 316 stainless sleeves into the junk pin bores and whittle 316 pins to fit...lol
Thread
Thread Starter
Forum
Replies
Last Post