Hello, sorry about my english, I have a 221 Falcon Engine Six Inline with turbo and more than 1000HP, I have problems with Head Gasket, any recomendation who can Make a Gasket for this kinf of engine? I Know best option is Oring, but I need to try whit a better head Gasket first. Any Maker? or custom made? Thanks a lot.

 

Have you tried dead soft copper?

 

https://fordsix.com/viewforum.php?f=1

https://fordsix.com/viewforum.php?f=22

Try posting your questions on those small block 6 Forums.

 

NO, Im in south America, so I will try in USA, where do you tell me. Thanks

 

Thanks I will do it.

 

I dont understand what you say, google I google dead soft copper and I See what is that, Is for O ringing no? I need to machine the block to put it? Sorry about my english

 

If me and I had gaskets that keep blowing I would just go for O-ring the block and ARP head studs if you are not running studs.
I know some motors that run high compression you can drill the block and heads for more studs. Don't know if that can be done with your motor?
Dave ----

 

Thanks a lot, Im runnig with big studs yes, Im lookin for someone who can make a customs MLS Gasket or similar, prior tu machine my block to put orings

 

If you have the budget to do it go Cometic. Cometic Gasket, Inc.

I believe they do custom gaskets but I doubt it will be cheap.