Clutch Question
Thread Starter
|
Cross-Country
Joined: Nov 2016
Posts: 88
Likes: 1
From: Pennsylvania
Clutch Question
Just took the ZFS542 out of my 95 F250 RWD, with a 351W, therefore it does not have a dual mass flywheel. The clutch in there was a Sachs, which is not a series dampened clutch (2 sets of springs)
I am looking at the Luk clutch kit, which is series dampened, as it is almost $40 cheaper on Rockauto. Will I run into fitment issues running a series dampened clutch if my truck did not have one to begin with?
Thanks in advance.
I am looking at the Luk clutch kit, which is series dampened, as it is almost $40 cheaper on Rockauto. Will I run into fitment issues running a series dampened clutch if my truck did not have one to begin with?
Thanks in advance.
Thread
Thread Starter
Forum
Replies
Last Post
highboy 74
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
11
Jan 3, 2006 12:58 AM
