Hey guys I'm about to upgrade my torque converter and found out I have low line pressure so while I'm in there I'm going to rebuild my pump I'm wondering what upgrades I can do to the pump while I have it out so far I have a torque converter on/off conversion and a sonnax boost valve kit to get my pressure back but was wondering if any of you know of any more mods I can do to the pump while it's out thanks for any info

 

Don't forget that upgraded front seal.

Check out the rest of the whole line of mod products for the 4R100 from Sonnax.

The accumulator springs mod in particular.

Pop

 

Look in to the TransGo Tugger HD2...and do the pump mods.

 

I have the sonnax acc springs,valves and the .500 line mod. But found out today I have low pressure so I need a new pump