When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
1994 F350 C&C no power to brake controller harness
I thought the aftermarket brake controller was bad so I replaced it. Still no power to controller. I'm not electrically inclined but can someone point me in the direction of where and what to check? Thanks !
... better yet, a set of ford factory service manuals.
until then, it looks like the trailer brake controller connector gets its power through a 30 amp maxi-fuse (fuse number 21) in the engine compartment fuse box.
... better yet, a set of ford factory service manuals.
until then, it looks like the trailer brake controller connector gets its power through a 30 amp maxi-fuse (fuse number 21) in the engine compartment fuse box.
I checked #21 and thought, great it's missing, I found my problem! But the prongs to hold the maxi fuse in the #21 place are not there. It looks factory just without the prongs.