Help
Thread Starter
|
New User
Joined: Oct 2017
Posts: 1
Likes: 0
Help
Hey there first time here but need ur help I have a 77 ford custom with a 400 big block and a auto trans with 4x4, im not so into this auto anybody able to suggest me a trans for this o was wonderong what problems i would have with tryong to hook up the SM465 MUNCIE and the NP205 to my motor any help
Cargo Master
Joined: Sep 2013
Posts: 3,259
Likes: 1,321
From: Pryor, OK
Welcome to FTE. Going from an automatic to a manual is a little bit of a chore but very doable. I would look for a NP435 or a T18, both granny gear 4 speed. They are what came from the factory so it will be much easier. But if you want a SM465, I'm sure someone makes an adapter to fit your 400.
AdvanceAdapters.com | Engine & Transmission Conversion Adapters - Advance Adapters
AdvanceAdapters.com | Engine & Transmission Conversion Adapters - Advance Adapters
Thread
Thread Starter
Forum
Replies
Last Post
JP808
Clutch, Transmission, Differential, Axle & Transfer Case
3
Jan 27, 2008 10:00 PM
maxfordfan
Clutch, Transmission, Differential, Axle & Transfer Case
4
Sep 7, 2004 06:20 PM
