Trailer Mode Selection Question
Thread Starter
|
More Turbo
Joined: Apr 2017
Posts: 628
Likes: 12
From: Madison WI
Trailer Mode Selection Question
I currently have a 26' bumper pull Jayco Travel Trailer, with the standard 7 pin connector. A couple days ago, I rented a 5x8 enclosed from UHaul that used the standard 4-pin connector.
1/2 way through my trip, I was looked at the "Trailer" menu and noticed I was accumulating miles under my "Jayco" trailer while pulling the UHaul.
I immediately selected No Active Trailer to stop those miles from accumulating.
My question is, why would
decide that just because I had a 4 pin lighting connector plugged in, that I was pulling my TT? Aren't these trucks smart enough to know which lighting connector is being used?
Obviously I'll check NEXT time...
1/2 way through my trip, I was looked at the "Trailer" menu and noticed I was accumulating miles under my "Jayco" trailer while pulling the UHaul.
I immediately selected No Active Trailer to stop those miles from accumulating.My question is, why would
decide that just because I had a 4 pin lighting connector plugged in, that I was pulling my TT? Aren't these trucks smart enough to know which lighting connector is being used?Obviously I'll check NEXT time...
Senior User
Joined: Jul 2012
Posts: 188
Likes: 2
From: Arizona
from what i understand it's a glitch.
myself and many others have to go in and select no active trailer every time i unhook to prevent tow miles from accumulating.
I guess not all truck are doing this, but there have been a few threads on the subject.
myself and many others have to go in and select no active trailer every time i unhook to prevent tow miles from accumulating.
I guess not all truck are doing this, but there have been a few threads on the subject.
Thread
Thread Starter
Forum
Replies
Last Post
epsail
All Things Towing
11
Jun 1, 2015 07:27 PM
