When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
It looks like a Dodge or Chrysler Torsion bar front end. Hard to tell which model, the common was the Plymouth volare or Dodge Aspen. 1974 to 77. Seen the Cordoba also
If I understand you correctly on the one shown here they are side to side. The last picture in this post shows the end attached to the lower a-arm right below the shock absorber, it has a "C" notch in the round end that butts the stop plate.
