Replace steering wheel and ring... advice?
Thread Starter
|
Junior User
Joined: May 2017
Posts: 96
Likes: 0
From: Pacific Northwest
Replace steering wheel and ring... advice?
My new factory style wheel and ring came in for the 69 f100. Looking to get them changed out tonight. Anything i should know? Seems pretty straight forward, remove ring, remove wheel bolt, use wheel puller put the new one on straight, put on ring.... anything else?
Thread Starter
|
Junior User
Joined: May 2017
Posts: 96
Likes: 0
From: Pacific Northwest
Ok, got the steering wheel done tonight... easy peasy. Took off the old horn ring with a slight 1/4 turn counter clock wise. Then there is a 15/16 bolt, undid that, then used a universal wheel puller and it came right off, lined up the new one, put the bolt back on, snugged it down, assembled the new horn ring, lined up the tabs, push down and a 1/4 turn clockwise, test drive and I was in business!
Pics when I can.
Pics when I can.
Ford Parts Specialist
Joined: Nov 2006
Posts: 88,826
Likes: 787
From: Simi Valley, CA
3 spoke 17" diameter steering wheel, horn button & horn ring:
1960/63 Falcon/Comet; 1961/66 F100/250 2WD; 1966 F100 4WD; 1966/73 Bronco (Bronco's didn't have a horn button, used a unique horn ring); 1967/70 F100/250 2WD/4WD; 1969/70 F350.
1960/63 Falcon/Comet; 1961/66 F100/250 2WD; 1966 F100 4WD; 1966/73 Bronco (Bronco's didn't have a horn button, used a unique horn ring); 1967/70 F100/250 2WD/4WD; 1969/70 F350.
Thread
Thread Starter
Forum
Replies
Last Post
72CamperSpecialGW
1967 - 1972 F-100 & Larger F-Series Trucks
6
Mar 25, 2019 08:28 PM
utahfarmer
1961 - 1966 F-100 & Larger F-Series Trucks
2
May 24, 2014 04:50 PM
rvx290
1961 - 1966 F-100 & Larger F-Series Trucks
3
Jul 15, 2011 11:53 AM
jpoesq1
1961 - 1966 F-100 & Larger F-Series Trucks
4
Aug 25, 2008 08:59 AM
