When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Ok how is it driven as the drive pulley is too far back to be driven off the front of the crank?
Also when was this built as that is old school because now days I think you would go with a Paxton self contained unit.
Dave ----
Idler shaft with a pulley on front and rear. Idler front driven off the crank and rear drives the blower. If you look close you can see it in the picture.
04-27-2017, 08:59 AM
