When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Good morning. I want to buy new rime tires and put a 2.5" level on.
so I am asking you guys for your opinions. Like to be somewhere between 35 and 37" tires. Don't want the wheel well packed tight but filled more then factory. My truck is black and think I want to stay with black rims since ideally id like to black everything out on the truck but keep it tasteful at the same time. hoping to order in the next week or two budget is around 2500 and 3000
in the straight on side view almost looks like your sqautting .5-1". on flat ground so the axles arent articulated, whats it measure from top of tire to fender well bottom ?
The reason for this is, the truck had 700 lbs of steel in the bed.
Originally Posted by willynilly
in the straight on side view almost looks like your sqautting .5-1". on flat ground so the axles arent articulated, whats it measure from top of tire to fender well bottom ?
that setup is perfect!!! Did you have and rubbing with that setup? I'm looking at the fuel kranks but they only offer them in 22x11 -13 offset. Hoping they don't rub a lot on a leveling kit with 35's
these are the same rims I've been looking at how far do they stick out past the wheel wells. if you don't mind could you post a picture of them from straight on
I have the painted to match smooth flares and don't stick out past at all. I just put 325/60/20 tires on yesterday as the 35" seemed small for the truck. I am going to sell the BFG 35" tires now. They have just 500 miles on them