Warn Manual Locking Hubs
Thread Starter
|
Junior User
Joined: Nov 2015
Posts: 88
Likes: 0
From: Allouez, WI
Warn Manual Locking Hubs
This is tough to explain so here goes my best. I have 2001 Limited v10 with Warn manual locking hubs and when I turn them to lock and start to drive, randomly I'll feel in the my feet through the floorboard a kind of clicking feeling. When I engage the 4x4 it goes away and when I disengage, it will come back randomly, can't find a pattern as to when it starts up again. The drivers side lock is more difficult to turn than the passenger side is.
Hoping that I do not need to replace since my wife is 2 days past her due date with our first child at this point.
Any ideas? Can I spray PB Blast or with that ruin the hubs?
Hoping that I do not need to replace since my wife is 2 days past her due date with our first child at this point.
Any ideas? Can I spray PB Blast or with that ruin the hubs?
FTE Chapter Leader
Joined: Nov 2010
Posts: 30,595
Likes: 1,236
From: N. IL
Would be worthwhile checking the u-joints in the axle driveline, inboard of the Warns. If they run outta grease and bind, you can get some sounds, vibrations, steering feedback, etc. Congratulations on the new family.
Thread
Thread Starter
Forum
Replies
Last Post
old_lynrd
1987 - 1996 F150 & Larger F-Series Trucks
2
Sep 13, 2010 01:06 PM
