No topic thread part 3-2017
#8837
Join Date: Dec 2003
Location: Saskatoon, Saskatchewan
Posts: 90,013
Received 1,395 Likes
on
1,150 Posts
Hello, John, Shaun, Steve, Grant, Perry and all who lurk here.
6 degrees of frost here last night, no relief insight for the next two wks.
I`m going to finish up the exhaust on my 53 resto rod and a few other things before the real cold hits us John.
Have a good weekend Grant.
Are you working all weekend Steve?
6 degrees of frost here last night, no relief insight for the next two wks.
I`m going to finish up the exhaust on my 53 resto rod and a few other things before the real cold hits us John.
Have a good weekend Grant.
Are you working all weekend Steve?
#8839
Join Date: Dec 2003
Location: Saskatoon, Saskatchewan
Posts: 90,013
Received 1,395 Likes
on
1,150 Posts
#8841
Join Date: Dec 2003
Location: Saskatoon, Saskatchewan
Posts: 90,013
Received 1,395 Likes
on
1,150 Posts
#8842
Join Date: Oct 2005
Location: northwestern Ontario
Posts: 263,458
Received 4,201 Likes
on
2,692 Posts
#8843
Join Date: Dec 2003
Location: Saskatoon, Saskatchewan
Posts: 90,013
Received 1,395 Likes
on
1,150 Posts
#8844
Join Date: Oct 2005
Location: northwestern Ontario
Posts: 263,458
Received 4,201 Likes
on
2,692 Posts
#8845
Twas a dry day and not to chilly, got $85 for my scrap metal, its worth $110 a ton right now. They have a guy now that uses a magnet to lift it out of the truck, probably an insurance thing. Tomorrow is Chinese puzzle time for the back yard and if it doesn't rain to bad I should have the big work done on Sunday and can be cleaning out the shop on Monday.
#8846
Join Date: Dec 2003
Location: Saskatoon, Saskatchewan
Posts: 90,013
Received 1,395 Likes
on
1,150 Posts
#8847
Thats for prepared, this tariff doesn't help and we're getting jammed up a bit with recycled metal. No hoist on this truck, just a flatdeck with wood plank sidewalls. Am hoping that I can get started on stripping off the front clip and pulling the drivetrain out of the 48 next week, so I'll start looking to see if theres anyone coming this way from Saskatoon that can load up that transmission Morris.
#8848
Good evening y'all.. it sounds like the shows are a whisper away.. My lows are in the low 60's for the next 7 nights.. and of course rain on my night off..
work went pretty good for me.. it was a bit tiring but I did take a couple sit down breaks during the time I was blowing down the area..
work went pretty good for me.. it was a bit tiring but I did take a couple sit down breaks during the time I was blowing down the area..
#8849
Join Date: Dec 2003
Location: Saskatoon, Saskatchewan
Posts: 90,013
Received 1,395 Likes
on
1,150 Posts
I hope that the tariffs don't drop the prices too badly, I have a bunch of aluminum scrape metal from left over airplanes to go hopefully this fall depending on the weather. I have a couple of one ton truck hoists I`m going to send to the scrap yards, doubt anyone around here will want them for even free. Let me know if you find anyone able to bring that transmission home for you Perry.
It`s good that you could take sit down breaks at work Steve, that works for me too.
It`s good that you could take sit down breaks at work Steve, that works for me too.