When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Got as far as the 2nd page of the diagnostic work sheet; Part 2, Test 7, and appears the problem was not with the module, which keeps on a tickin over these many years, but rather the distributor. Found I was unable to get an ohm's reading at all. Pulled the distributor, noticed the mounting surface and distributor housing had some serious surface rust, cleaned both, wiggled a couple wire, and cleaned the stator, reinstalled the distributor and tested; O' my, got a reading. Reassembled harnesses, set timing, and Zoom-Zoom. The work sheet, wire wheel and sand paper saved me the cost of a replacing the module?
Again, I thank you!!
Good deal. Glad to hear the diagrams got you to where you needed to be and back operational again.
