Backup Camera Issues

Reply Subscribe

Thread Tools

Search this Thread

Nov 11, 2016 | 08:18 PM

Bigblu98

Thread Starter

New User

Joined: May 2016

Posts: 2

Likes: 0

Backup Camera Issues

hello Everyone, Earlier this year I purchased brand new my '16 f 250 cab chassis,with 6.2, I ordered it with a lariat package also, so it has the 8 inch touch screen, no navigation, I have been trying to get a ford backup camera to work with the truck, and have been unsuccessful, Even the ford dealership said they cant help, Here's what I have done so Far, Installed a 10 amp fuse in the fuse box under the hood for the backup camera, plugged the camera in the back factory wiring harness, bought a programmer from OBD genie to enable the camera, After I downloaded the genie, the touchscreen now recognizes something is happening when I put it in reverse, but an error message pops up and sais , Camera unavailable, please contact your dealership., and I also have no power to the plug at the back of the truck in the camera harness, Anybody have any thoughts of what to do next, Were all stumped on what to do next, I really want to integrate the touchscreen

Nov 12, 2016 | 12:46 PM

seville009

Logistics Pro

Joined: Nov 2004

Posts: 4,795

Likes: 47

I don't really have an answer, but I have a 2013 Taurus with a back up camera that has become permanently blurry (apparently a common problem). When I was checking it out online, it appears that if I buy a new Ford camera and install it myself, that the existing system would not recognize it until I took it to a dealer to have them reflash it (or whatever). Maybe that's all you need to do now that you have it installed.

Nov 12, 2016 | 02:17 PM

ZooDad

Retired guy fixn stuff

Joined: Mar 2009

Posts: 3,226

Likes: 1,240

From: East TN

I would guess something else needs to be enabled in the BCM.
I am mapping the codes with FORScan.

If you can run your as built data, I can compare it to mine and see if there are any differences in camera.