Flex plate part number?
Thread Starter
|
Senior User
Joined: Feb 2015
Posts: 155
Likes: 0
Flex plate part number?
Hey guys,
I'm finally getting around to dropping in my 351w into my 4x4, having some trouble locating the propor flex plate though. It's a 95 F150 4x4 with the 4R70W trans in it and had the 302 in it. I'm working on putting a 94 351w engine in it ( from a bronco ) and that had the E4OD trans, not able to swap the trans with it so that's out of the question. I remember seeing what FP to use months ago but lost the number. Any one know off hand?
Thanks
I'm finally getting around to dropping in my 351w into my 4x4, having some trouble locating the propor flex plate though. It's a 95 F150 4x4 with the 4R70W trans in it and had the 302 in it. I'm working on putting a 94 351w engine in it ( from a bronco ) and that had the E4OD trans, not able to swap the trans with it so that's out of the question. I remember seeing what FP to use months ago but lost the number. Any one know off hand?
Thanks
FTE Legend
Joined: Jun 2006
Posts: 31,930
Likes: 1,499
From: Ottawa, Ontario
You need a 28oz 164 tooth flexplate for an AOD transmission. The 5.8 was only mated with an AOD in some mid '80s crown Vics so that is what you need to search for, that motor was never factory installed with the AOD or the 4R70w in trucks.
Ford Parts Specialist
Joined: Nov 2006
Posts: 88,826
Likes: 785
From: Simi Valley, CA
ALL 1981/89 LTD (name changed to Crown Victoria in 1983)/Grand Marquis 351W came with AOD
EOAZ-6375-A .. Flexplate.
This same flexplate was also used in 1981 E/F100/250 & Bronco 302/C6.
Thread
Thread Starter
Forum
Replies
Last Post
travisd
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
33
May 8, 2018 10:10 AM
Ab73ford
1973 - 1979 F-100 & Larger F-Series Trucks
18
Jul 10, 2014 03:54 PM
corner27
1973 - 1979 F-100 & Larger F-Series Trucks
14
Sep 30, 2010 09:44 AM
78bigbronco
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
8
Sep 12, 2003 02:28 PM
