Kudos for Y Blocks!
#1
Kudos for Y Blocks!
A big congrats go to these engine builders.
Ford Y Block Takes Vintage Class Win at Engine Masters 2016 - Hot Rod Network
597.3 horsepower is nothing to take lightly and a $12k prize sure looks good.
Ford Y Block Takes Vintage Class Win at Engine Masters 2016 - Hot Rod Network
597.3 horsepower is nothing to take lightly and a $12k prize sure looks good.
#3
A big congrats go to these engine builders.
Ford Y Block Takes Vintage Class Win at Engine Masters 2016 - Hot Rod Network
597.3 horsepower is nothing to take lightly and a $12k prize sure looks good.
Ford Y Block Takes Vintage Class Win at Engine Masters 2016 - Hot Rod Network
597.3 horsepower is nothing to take lightly and a $12k prize sure looks good.
Ted Eaton is one of the TOP Y-Block builders in the entire country!
I just had a look at his page on camshaft/lifter failures. It tells us that Zddp and/or secret sauce oil is NOT necessarily the "end-all---cure-all of camshaft/ flat-tappet life!!
Eaton Balancing » Camshaft and Lifter Failure Causes
Thread
Thread Starter
Forum
Replies
Last Post
ALL AMERICAN BOY
Y-Block V8 (239, 272, 292, 312, 317, 341, 368)
4
12-21-2011 03:26 PM
charliemccraney
Y-Block V8 (239, 272, 292, 312, 317, 341, 368)
5
10-15-2010 06:50 AM
Scouder
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
6
09-03-2005 09:49 PM
jaydgraff
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
4
06-24-2005 01:30 AM
georgedavila
Big Block V8 - 385 Series (6.1/370, 7.0/429, 7.5/460)
8
06-30-2003 01:36 PM