4x4 Wont Engage
Thread Starter
|
Senior User
Joined: Aug 2016
Posts: 138
Likes: 1
4x4 Wont Engage
Hey all, so I found out the hard way today that my four wheel drive isn't working.
Truck is a 2001 F250 with 90k miles. I have manual hubs and the switch on the dash.
I don't have much experience with this setup at all. My F150 had the switch on the dash and automatic hubs that never once gave me any trouble at all.
I think I have the hubs locked in (turned in counter-clockwise position), however, neither way I turn them makes any change.
What's odd to me is that when I turn the switch, nothing at all happens, it's completely quiet. Only the light comes on.
In my F150 you could hear it in the transfer case and the hubs.
Any ideas where I should start?
Truck is a 2001 F250 with 90k miles. I have manual hubs and the switch on the dash.
I don't have much experience with this setup at all. My F150 had the switch on the dash and automatic hubs that never once gave me any trouble at all.
I think I have the hubs locked in (turned in counter-clockwise position), however, neither way I turn them makes any change.
What's odd to me is that when I turn the switch, nothing at all happens, it's completely quiet. Only the light comes on.
In my F150 you could hear it in the transfer case and the hubs.
Any ideas where I should start?
Thread
Thread Starter
Forum
Replies
Last Post
Piolet
1999 - 2016 Super Duty
20
Feb 2, 2013 09:54 PM
bumble bee
1987 - 1996 F150 & Larger F-Series Trucks
2
Feb 15, 2006 09:36 AM
