ok guys this may or may not be a dumb question but I have an extended cab long bed 1997 obs truck and I was wondering if it was possible to take the cab and bed off and put a 4 door short bed on? so any help would be awesome

 

anything is possible if you can fabricate mounts.

 

This was kind of asked over in the Bull nose area.
What was brought up is look at the frames between the 2 trucks.
More of where the frame turns up after the cab. I am thinking the turn up is farther back on the 4 door than the ext cab frame.


If that checks out ok then look into the frame mounts.
Dave ----