I need to reproduce a date plate for the glovebox on my 60 F500. (its missing) can someone provide me the dimensions of the plate including location of 2 rivet holes so I can forward the information to a company I found who produces replicas. Thanks!

 

I have an old date plate from a 60 F100 that I don't need. You can have it. I'll mail it to you. The plate is 3.5" long x 1.75" tall. Holes are 1/4", centered from top to bottom and 3-3/32" apart, center to center left to right. The center of each hole is 3/16" from each end. Let me know if interested.

 

Thanks for the reply. I was able to measure one in person and now I'm on a quest to find a blank data plate.....if they even exist