511 Build
Thread Starter
|
Posting Guru
Joined: Jul 2003
Posts: 1,287
Likes: 3
511 Build
I took out our 428cj and replaced it with a 511 ci. Keith Craft FE.
Aluminum pond block, Edelbrock heads, roller cam, etc. etc. We have it in and running in our Falcon. Just waiting for the temperature to go down, so we can see what it will do at the track. 106 degrees here today.
We also have a 250 hp nitrous plate system if we need more power.
Aluminum pond block, Edelbrock heads, roller cam, etc. etc. We have it in and running in our Falcon. Just waiting for the temperature to go down, so we can see what it will do at the track. 106 degrees here today.
We also have a 250 hp nitrous plate system if we need more power.
Thread Starter
|
Posting Guru
Joined: Jul 2003
Posts: 1,287
Likes: 3
6,200 rpm 760.1 hp
6,300 rpm 763.4
6,400 rpm 764.9
6,500 rpm 767.0
6,600 rpm 767.5
6,700 rpm 766.4
It was over 706 hp at 5,300 rpm
6,300 rpm 763.4
6,400 rpm 764.9
6,500 rpm 767.0
6,600 rpm 767.5
6,700 rpm 766.4
It was over 706 hp at 5,300 rpm
Thread
Thread Starter
Forum
Replies
Last Post
maxtor
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
13
Mar 12, 2009 11:23 AM
luvinfords
Performance & General Engine Building
8
Oct 10, 2004 03:39 PM
