cluster circuit board relplacement
Thread Starter
|
Junior User
Joined: Aug 2014
Posts: 86
Likes: 0
From: Wi. Rapids, WI
cluster circuit board relplacement
I'm probably doing this wrong (posting this) as it is kind of a continuing saga.
I posted one a couple of days ago re: not charging, ie. ignition, starter or solenoid. Last night it dawned on me that I had not seen my battery indicator on my dash at start up. Today, I pulled the dash including the cluster assembly. There was a mouse nest (occupied) of considerable size and it was evident that they had chewed wires. This I can deal with. However, there are areas on the plastic circuit board (?) that are obviously cooked. Can I buy just that board or do I have to buy the entire gauge and board assembly? And from whom?
Thanks. You guys have saved my butt often. Thanks to you folks my 6.0 PSD is running great.
I posted one a couple of days ago re: not charging, ie. ignition, starter or solenoid. Last night it dawned on me that I had not seen my battery indicator on my dash at start up. Today, I pulled the dash including the cluster assembly. There was a mouse nest (occupied) of considerable size and it was evident that they had chewed wires. This I can deal with. However, there are areas on the plastic circuit board (?) that are obviously cooked. Can I buy just that board or do I have to buy the entire gauge and board assembly? And from whom?
Thanks. You guys have saved my butt often. Thanks to you folks my 6.0 PSD is running great.
Thread
Thread Starter
Forum
Replies
Last Post
