Transmission Cooler Line HELP!!
Thread Starter
|
Freshman User
Joined: Apr 2014
Posts: 32
Likes: 0
Transmission Cooler Line HELP!!
Hello I have a 2008 Ford F250 Superduty and recently I had a transmission cooler line start to leak. I ordered replacement lines and the tool for the quick disconnect. The line that's leaking is from the radiator to the quick disconnect. I was able to replace the one line, however the second line (problem area) has been a nightmare. The line cracked right at the quick disconnect fitting. The hard line is tight in the fitting and corroded. broke the tool trying to remove from disconnect. The line is flush with the quick disconnect. Any ideas how to get that out of the fitting? or another method of fix? Its a hard 1/2 line going into connect crimped to rubber line going to transmission. Any help or suggestions are appreciated.
Sincerely,
Matt
Sincerely,
Matt
Cargo Master
Joined: Jun 2010
Posts: 2,113
Likes: 4
From: Iowa
You probably have already fixed this but.... Try threading a bolt thread tap into the pipe lightly while holding it with pliers then use the disconnect tool and carefully pull the pipe out with the tap.
Thread
Thread Starter
Forum
Replies
Last Post
JamesHajek
1994.5 - 1997 7.3L Power Stroke Diesel
18
Feb 11, 2013 03:47 PM
RailDawg
1997 - 2006 Expedition & Navigator
5
Dec 19, 2009 12:02 PM
