460 Crank snouts
Thread Starter
|
Freshman User
Joined: Sep 2004
Posts: 41
Likes: 0
From: Pahrump NV
460 Crank snouts
Can someone explain to me the variations regarding 460 crank "snouts" ?
While I've built up a 460 and a 429 a few years back, I always used the stock cranks, and rods. So this was never an issue for me.
This is my first 460 stroker.. I've got a crank from Lunati, but all they can tell me is that the length of the "snout" is 5 inches.
I've seen on the internet (I forgot where) something about certain 429/460 cranks having a "short snout"... Also what's the deal with a BBC "snout" what's that all
about.
Thanks
Devbravo
While I've built up a 460 and a 429 a few years back, I always used the stock cranks, and rods. So this was never an issue for me.
This is my first 460 stroker.. I've got a crank from Lunati, but all they can tell me is that the length of the "snout" is 5 inches.
I've seen on the internet (I forgot where) something about certain 429/460 cranks having a "short snout"... Also what's the deal with a BBC "snout" what's that all
about.
Thanks
Devbravo
Thread
Thread Starter
Forum
Replies
Last Post
jonnybronco
Big Block V8 - 385 Series (6.1/370, 7.0/429, 7.5/460)
8
Apr 1, 2007 10:59 PM
fudgythewhale
Big Block V8 - 385 Series (6.1/370, 7.0/429, 7.5/460)
2
Feb 16, 2004 10:33 PM
