Putting 360fe back in
Thread Starter
|
New User
Joined: Apr 2016
Posts: 20
Likes: 0
Putting 360fe back in
Hey guys new here and bought a f100 already taken apart freaking headache I rebuilt the block now in the process of putting back into truck and now comes the putting wires hoses and vac lines back to where they go and not knowing where they go doesn't help if anyone has a good starting point I would really appreciate it thanks a Tom
Fleet Owner
Joined: Jun 1999
Posts: 24,552
Likes: 74
From: Creedmoor, North Carolina
Tom Welcome to 
and the Bumpside Forum. 
We have a couple guys here, ultraranger being one of them that is very handy with photos and can offer good help.
Good luck with your project.
John
and the Bumpside Forum. We have a couple guys here, ultraranger being one of them that is very handy with photos and can offer good help.
Good luck with your project.
John
Lead Driver
Joined: Aug 2003
Posts: 7,592
Likes: 10
From: **** hole San Jose ca.
Hey guys new here and bought a f100 already taken apart freaking headache I rebuilt the block now in the process of putting back into truck and now comes the putting wires hoses and vac lines back to where they go and not knowing where they go doesn't help if anyone has a good starting point I would really appreciate it thanks a Tom
Plus if it has PS & PB's & auto choke stock 2brl carb or 4brl.
Orich
Thread Starter
|
New User
Joined: Apr 2016
Posts: 20
Likes: 0
It is a 70 has ps and pb no a.c. 4 barrel carb
Thread
Thread Starter
Forum
Replies
Last Post
trump13
1961 - 1966 F-100 & Larger F-Series Trucks
5
Jul 15, 2004 12:21 AM
1962_Fords_rule
Y-Block V8 (239, 272, 292, 312, 317, 341, 368)
1
Nov 7, 2003 07:55 AM
carlo
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
6
Aug 8, 2003 08:25 AM
