Little help please
Thread Starter
|
Freshman User
Joined: Jan 2016
Posts: 39
Likes: 0
Little help please
Hi all is a standard cast inlet from a 67 mustang 302, (4 barrel version) Holley or edelbrock fitment or a ford carb only fitment
I have been offered one without a carb and am thinking of going 4 barrel on my 302
I have been offered one without a carb and am thinking of going 4 barrel on my 302
Cargo Master
Joined: Aug 2015
Posts: 2,076
Likes: 101
From: Marana, Arizona
I have put Holley carbs on a stock Ford cast iron intake. The gasket is the thing that will get you. The regular Holley gaskets will allow a vacuum leak. You have to get the gaskets that cover more area. I don't remember any part numbers.
The studs are in the correct pattern for the carb to go right on.
The studs are in the correct pattern for the carb to go right on.
Thread Starter
|
Freshman User
Joined: Jan 2016
Posts: 39
Likes: 0
I have put Holley carbs on a stock Ford cast iron intake. The gasket is the thing that will get you. The regular Holley gaskets will allow a vacuum leak. You have to get the gaskets that cover more area. I don't remember any part numbers.
The studs are in the correct pattern for the carb to go right on.
The studs are in the correct pattern for the carb to go right on.
Thread
Thread Starter
Forum
Replies
Last Post
herdfan75
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
2
May 28, 2011 10:57 PM
araiderfan2001
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
1
Apr 19, 2003 11:49 PM
Scott_in_Canada
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
2
Apr 19, 2003 02:32 PM
