6.0 no start

Reply Subscribe

Thread Tools

Search this Thread

Jan 23, 2016 | 06:42 PM

Cityguy13

Thread Starter

Freshman User

Joined: May 2015

Posts: 27

Likes: 0

6.0 no start

So I have a no start on my 6.0. I was driving and went to accelerate and had no power, pulled off of the road and was idling rough, I checked for fuel leaks-none. I put it in drive and engine cut off and wouldn't start again, changed the ICP (threw a code) still nothing, FICM is good, ICP is 950 psi at cranking, IPR is only at 54%. I'm at a loss of what to do next besides looking at the IPR, and I do not have the equipment for a leak test.

Jan 23, 2016 | 09:40 PM

Shepherd2

Elder User

Joined: Sep 2009

Posts: 514

Likes: 2

Your pressures are good. I would check for a fuel or cam/crank sensor problem.

Jan 23, 2016 | 09:53 PM

coastline_rider

Junior User

Joined: Jan 2016

Posts: 51

Likes: 1

From: Southeastern FL

Ok, what year is it?

Jan 23, 2016 | 09:55 PM

Cityguy13

Thread Starter

Freshman User

Joined: May 2015

Posts: 27

Likes: 0

2004, late model

Jan 24, 2016 | 08:17 PM

texastech_diesel

Token Redneck

Joined: Jun 2007

Posts: 9,339

Likes: 350

From: Breckenridge, TX

Pull any pending or stored codes. Pull the IPR and check the screen on it. Pull the secondary fuel filter and see if it fills up at KOEO.

No Start checklist:
https://www.ford-trucks.com/forums/8...condition.html

Jan 24, 2016 | 10:33 PM

Cityguy13

Thread Starter

Freshman User

Joined: May 2015

Posts: 27

Likes: 0

Quote:

Originally Posted by texastech_diesel

I pulled the IPR, when I did the screen did not come out with the IPR and the O ring was cracked, but I pulled the screen out and no holes, I haven't added any anti gel to the fuel and its hasn't been above 40 here for a while, how would I know of the fuel is gelled? I pulled the secondary fuel filter and it was clear and not cloudy, I'm from Florida so never really had to add anti gel to fuel but I did tonight