CII Power Steering Pump help
Hotshot
Joined: Mar 2013
Posts: 14,255
Likes: 199
From: Phoenix, Az.
That's the E1AZ3A561A or E6TZ3A561A valve. Ford uses the same pic for all the CII pumps back then. I am assuming the check ***** etc are inside the pics I found on EBAY. Notice "3a561" pointing to the stuff you referenced.
Thread Starter
|
Elder User
Joined: Dec 2006
Posts: 881
Likes: 1
From: Sudbury, ONT.
OK, so I may not be missing anything.
Thread Starter
|
Elder User
Joined: Dec 2006
Posts: 881
Likes: 1
From: Sudbury, ONT.
Thread Starter
|
Elder User
Joined: Dec 2006
Posts: 881
Likes: 1
From: Sudbury, ONT.
I put the new (replacement) pump on yesterday, and spun the pulley by hand until the fluid level stopped dropping. Then I started the truck, and the pump never made a sound! I wiggled the steering wheel a little back and forth, and still no noise. I can't push the brakes yet until I get my new rear brake lines installed.
Hotshot
Joined: Mar 2013
Posts: 14,255
Likes: 199
From: Phoenix, Az.
I put the new (replacement) pump on yesterday, and spun the pulley by hand until the fluid level stopped dropping. Then I started the truck, and the pump never made a sound! I wiggled the steering wheel a little back and forth, and still no noise. I can't push the brakes yet until I get my new rear brake lines installed.
Thread
Thread Starter
Forum
Replies
Last Post
Coastal68
1967 - 1972 F-100 & Larger F-Series Trucks
16
Oct 1, 2015 01:17 PM
Anthonyp55
1967 - 1972 F-100 & Larger F-Series Trucks
8
Sep 4, 2015 10:49 AM
acreature
1967 - 1972 F-100 & Larger F-Series Trucks
5
Apr 29, 2013 01:38 PM
zukinut
1967 - 1972 F-100 & Larger F-Series Trucks
4
Dec 14, 2011 11:22 PM
