Help with 351w efi build
Thread Starter
|
New User
Joined: Jan 2016
Posts: 3
Likes: 0
Help with 351w efi build
Hey guys I need some answers I am pulling my 351w outta my 1996 f150 4x4 and putting it in a 1994 2wd making a hot rod but I wanna run with a e303 cam and gt 40 heads with shorty headers so what kinda lifters and what push rods wld I have to run also where can I get the right e303 cam for my 351w please help me out here not looking to spend an arm and leg just refreshing block and want to add a little power
Last edited by Fordster1996; Jan 4, 2016 at 05:17 PM. Reason: Needed to add info
FTE Legend
Joined: Jun 2006
Posts: 31,930
Likes: 1,499
From: Ottawa, Ontario
Why the E303?
Stock lifters and pushrods are all that is needed for any roller cam in this block.
Even with GT40 heads this motor will run out of airflow at no more than 5000rpm and much less than that with the stock truck intake, so the e303 is a bad mismatch and I'd suggest the Comp 35-320-8 instead.
Stock lifters and pushrods are all that is needed for any roller cam in this block.
Even with GT40 heads this motor will run out of airflow at no more than 5000rpm and much less than that with the stock truck intake, so the e303 is a bad mismatch and I'd suggest the Comp 35-320-8 instead.
Thread Starter
|
New User
Joined: Jan 2016
Posts: 3
Likes: 0
another question for you is a friend of mine has a 95 f150 with 351w in it to and wants to have some cam lope but dont wanna change of bunch hed like to just buy a cam what would you recomend for that?
FTE Legend
Joined: Jun 2006
Posts: 31,930
Likes: 1,499
From: Ottawa, Ontario
Tell him he's driving an EFI pickup truck not a '60's muscle car so he can't have it without totally F ing up his truck.
Thread
Thread Starter
Forum
Replies
Last Post
peepinu
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
1
Sep 5, 2009 05:59 PM
