dana 44 disc conversion

Reply Subscribe

Thread Tools

Search this Thread

Jan 5, 2016 | 12:58 PM

#16

Dumple

Thread Starter

Freshman User

Joined: Jan 2015

Posts: 37

Likes: 0

I'll try and post some more pictures of it when I get off of work. The tag is completely rusted except for a small ford oval. But hopefully someone will be able to educate me on it after seeing more pictures

Jan 5, 2016 | 01:53 PM

#17

82F100SWB

Post Fiend

Joined: Jan 2000

Posts: 5,330

Likes: 17

From: Dryden, ON, Canada

There should be a number stamped into the axle itself. Usually found stamped into the tube on the long side, front, near the diff

Jan 5, 2016 | 02:18 PM

#18

Dumple

Thread Starter

Freshman User

Joined: Jan 2015

Posts: 37

Likes: 0

Quote:

Originally Posted by 82F100SWB

There should be a number stamped into the axle itself. Usually found stamped into the tube on the long side, front, near the diff

Alright, I'll check after work and keep you guys posted

Jan 5, 2016 | 09:35 PM

#19

Dumple

Thread Starter

Freshman User

Joined: Jan 2015

Posts: 37

Likes: 0

So I checked the width and it looks like it's pretty close to 70" from one tip of the hub to the other. No numbers were stamped into it

Jan 5, 2016 | 09:53 PM

#20

82F100SWB

Post Fiend

Joined: Jan 2000

Posts: 5,330

Likes: 17

From: Dryden, ON, Canada

Probably about a 65" wheel mount surface to wheel mount surface then.
The BOM will be on the tag as well if it is still there.
This should help finding it: Differential Identification | West Coast Differentials
The numbers on the tube are probably only 3/8" high.