Going to begin wiring. Advice/ Pics

Reply Subscribe

Thread Tools

Search this Thread

Dec 31, 2015 | 05:58 PM

Don Vito

Thread Starter

Senior User

Joined: Jun 2014

Posts: 341

Likes: 2

From: Phoenix Arizona

Going to begin wiring. Advice/ Pics

Using the Rebel Wire 9 +3 system, I guess the main thing is where have you guys mounted your fuse block? I spent a lot of time smoothing out my firewall and really don't want screws/bolts etc showing, thought about inside the driver kick panel, but not sure how that will work out? Pics of fuse block mounting options would be appreciated.
Happy New Year!!
Don

Dec 31, 2015 | 11:15 PM

AcesHigh

Junior User

Joined: Apr 2015

Posts: 82

Likes: 0

From: Myrtle Beach

There's tons of room in the kick panel. I smoothed out my firewall as well, and wanted all my under hood wiring hidden. I drilled a hole underneath just forward of the cab mount and ran all my exterior wiring out there and inside the frame. Even my ballast resistor and starter solenoid are mounted inside the frame. Took a bit longer to wire it that way, but looks so smooth.