Treasure Valley Machine shops
Thread Starter
|
Lead Driver
Joined: Apr 2008
Posts: 6,945
Likes: 13
Treasure Valley Machine shops
Hey guys, dont get down here in this section much, but i need some input. I had heard some good things about the 4x4 Shop in Caldwell, but after dealing with them I want to find someone else. Another name i was recommended but know nothing about is Mulders Auto Machine in boise.
Anyone familiar with 6.9 / 7.3 IDI diesels would be a HUGE plus. Not many at all seem to have any clue what they are. I have already spoken with Woods Rebabbiting and theyre not comfortable with 7.3s due to normally needing sleeves (even though mine doesnt) nor are they comfortable with rebuilding something not to factory spec (performance minded build). They were my first choice.
Besides sonic checking and the basics i need the rods narrowed / re-con'd with ARP stuff and pistons milled. The rest is fairly straight forward, square deck, hone, studs top and bottom, balance, girdle and valve job. There are also a few busted head bolts in the right bank.
That said, in the future im looking at having a 351c cleaned up and /or a 408w build for the fairlane. Experience with Clevlands would also be a big plus.
Looking for good machine work for a good price, so no uncles garages nor full on race shops please.
Anyone familiar with 6.9 / 7.3 IDI diesels would be a HUGE plus. Not many at all seem to have any clue what they are. I have already spoken with Woods Rebabbiting and theyre not comfortable with 7.3s due to normally needing sleeves (even though mine doesnt) nor are they comfortable with rebuilding something not to factory spec (performance minded build). They were my first choice.
Besides sonic checking and the basics i need the rods narrowed / re-con'd with ARP stuff and pistons milled. The rest is fairly straight forward, square deck, hone, studs top and bottom, balance, girdle and valve job. There are also a few busted head bolts in the right bank.
That said, in the future im looking at having a 351c cleaned up and /or a 408w build for the fairlane. Experience with Clevlands would also be a big plus.
Looking for good machine work for a good price, so no uncles garages nor full on race shops please.
Thread Starter
|
Lead Driver
Joined: Apr 2008
Posts: 6,945
Likes: 13
A little late in coming back to this. I would also stay away from The 4x4 Shop in Caldwell. Talked Woods into doing it after the 4x4 shop tried to ruin my block. Bennetts got it fixed and woods got everything cleaned up and in spec.
Senior User
Joined: May 2003
Posts: 100
Likes: 0
From: Meridian, Idaho
In Meridian, check out MERIDIAN AUTOMOTIVE just south of the RR tracks and downtown meridian.
I haven't had any major engine work done but they have all the equipment and are close to meridian speedway,
so maybe they work for some of the track guys.
Worth a shot.
I haven't had any major engine work done but they have all the equipment and are close to meridian speedway,
so maybe they work for some of the track guys.
Worth a shot.
Mountain Pass
Joined: Aug 2016
Posts: 173
Likes: 0
From: Meridian ID
Way late jumping into this but I would have my machine work done by Meridian Automotive. My dad used them when Shorty in Nampa passed away. I've had repairs done by them over the years. And to top that off, the mechanic I use for the wife's car, Benchmark Automotive in Garden City, sends their stuff to Meridian Automotive. FWIW
Thread
Thread Starter
Forum
Replies
Last Post
