When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I just put my 400 back in my truck. Went to start it it would fire and kinda run. First the carb was for a 302 so it would not run very well. I put the carb for it back on and it fired a couple times now nothing. It has spark. I thought I flooded it so I let it sit all weekend. Today no fire at all pore a little gas down carb. Nothing just cranks I'm at a loss now. Any info will help thx
unless its bypassing aka no compression , look in to timing , have u had the wires off? recheck . and make sure timing matchs top dead center in number 1 , but like tedster said check the fuel
unless its bypassing aka no compression , look in to timing , have u had the wires off? recheck . and make sure timing matchs top dead center in number 1 , but like tedster said check the fuel
I finally got it to fire again don't no what the problem was I will update when I get time to try again