F100 74
Thread Starter
|
New User
Joined: Sep 2015
Posts: 3
Likes: 0
F100 74
I have a 74 f100 3 speed standard and don't know what would be the problem, if it's the clutch or the transmission, or anything else. I press the clutch and put it into gear and feels or sounds like it goes into gear but won't run, all it does is Rev up and the speedometer goes up, also when i put it in reverse it grinds a little like if it wants to go into gear .... can anyone tell me what it might be....thanks....
Lead Driver
Joined: Apr 2011
Posts: 6,399
Likes: 40
From: El Dorado, Arkansas
The speedometer drive gear is on the output shaft of the transmission. The driven gear on the end of the speedometer cable engages the drive gear of the output shaft.
For the speedometer to register a reading, the power from the engine would have to be sent through the transmission.
For the speedometer to register a reading, the power from the engine would have to be sent through the transmission.
Thread Starter
|
New User
Joined: Sep 2015
Posts: 3
Likes: 0
Ultraranger thanks I found the problem, the output shafts ended up being broken..... now would you happen to know if I can replace it myself or would I have to take it to get done.... again thanks....
Thread
Thread Starter
Forum
Replies
Last Post
IntrstlarOvrdrve
1961 - 1966 F-100 & Larger F-Series Trucks
3
Jan 17, 2015 11:37 PM
kona56
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
4
Apr 5, 2010 02:13 PM
pinguin
Clutch, Transmission, Differential, Axle & Transfer Case
5
Nov 21, 2003 10:16 PM
