87 F600 Carb
#4
In order to look up the carburetor, I need the ID tag number, as there are 4 possibilities.
Triangular shaped ID tag number on the top of the carb, retained by a screw.
If the tag is missing, I need the Calibration Code, located on a decal (yellow or white) on the valve cover, or on the radiator support, in front of the radiator cap.
Code could be 9-83H-R11 or 5-83H-RO or 5-83H-R10 or 7-83H-R10
Triangular shaped ID tag number on the top of the carb, retained by a screw.
If the tag is missing, I need the Calibration Code, located on a decal (yellow or white) on the valve cover, or on the radiator support, in front of the radiator cap.
Code could be 9-83H-R11 or 5-83H-RO or 5-83H-R10 or 7-83H-R10
#5
#6
When Ford went to Calibration Codes beginning in 1983, it made it very difficult (sometimes impossible) to look up carbs and emission related parts, because they are only listed in the code charts.
I usually don't mess with these parts when members ask about them, because it's a royal PITA!
Thread
Thread Starter
Forum
Replies
Last Post
boggerted
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
6
06-02-2009 09:57 PM