No Start condition, need guidance, help
Thread Starter
|
Cross-Country
Joined: Aug 2013
Posts: 63
Likes: 1
From: Earth, (land portion)
No Start condition, need guidance, help
2005 PSD Ex. 4x4.
Drove it a few nights ago and it felt really gutless. Next morning, no start. Well, it tried, but it sounded like it was run out of fuel (had half a tank)and I turned it off. Changed both fuel filters, key on / key off to purge system about 2 dozen times. Still no start.
I have all eight injectors with "injector Circuit Low" code, a P0401 - Exhaust Gas ReCir Flow Insufficient Detected, and P0672 - Glow Plug #2 (which it has had for a few months).
I thought with all of the injectors, it might be the FICM, checked the FICM voltage with Torque during a start and it showed 47V the whole time.
Any ideas? Harness? I did not think running with the glow plug error would be a big deal especially during the summer in So Cal.
Thanks guys.
Drove it a few nights ago and it felt really gutless. Next morning, no start. Well, it tried, but it sounded like it was run out of fuel (had half a tank)and I turned it off. Changed both fuel filters, key on / key off to purge system about 2 dozen times. Still no start.
I have all eight injectors with "injector Circuit Low" code, a P0401 - Exhaust Gas ReCir Flow Insufficient Detected, and P0672 - Glow Plug #2 (which it has had for a few months).
I thought with all of the injectors, it might be the FICM, checked the FICM voltage with Torque during a start and it showed 47V the whole time.
Any ideas? Harness? I did not think running with the glow plug error would be a big deal especially during the summer in So Cal.
Thanks guys.
Thread Starter
|
Cross-Country
Joined: Aug 2013
Posts: 63
Likes: 1
From: Earth, (land portion)
Mods, I started a copy of this thread over on the 6.0 psd section. Can you please kill this thread. Thank you.
-----------------------
Mods, should this be moved? If so, can someone please move it for me vs having two threads?
Thank you.
-----------------------
Mods, should this be moved? If so, can someone please move it for me vs having two threads?
Thank you.
Last edited by zipdrive; Aug 25, 2015 at 07:24 PM. Reason: suggestion to move to 6.0l psd fourm
Thread
Thread Starter
Forum
Replies
Last Post
PADoubleX
6.0L Power Stroke Diesel
83
Nov 11, 2013 10:20 AM
